We are so excited to share with you that the firmware of FEELWORLD L2 PLUS upgrade to version 1.58 in audio mixing feature and other some optimization.
Please click the correct link for your system to download and install. For Windows, if you download it on C disk, please right click the mouse and choose " Run as administrator" to install.
Steps for Upgrade：
1. Prepare tool: XTOOL V188.8.131.52 and upgrade cable
2.1 Turn on the power of L2 PLUS, then use LAN cable to connect device and PC.
2.2 The default IP is 192.168.0.99, so make sure the PC and device are in the same IP segment, which means the IP of PC must be 192.168.0.XXX (but must not be completely same as the device).
2.2.1 Windows sytem IP setting. As the picture show to check if your PC in the same IP segment.
2.2.2 MAC system setting
Choose "Open Network Preferences"
Click "USB 10/100 LAN", choose " Manual" for configuring. Set IP address and router IP in the same IP segment , then click "Apply".
2.3 Open the upgrade tool XTOOL, click Connection
2.4 Choose Net Comm in pop up window and set IP address the same to the switcher, then click Confirm.
2.5 Upgrade Program
After communication setting is done,will show "IP address set!", then click Confirm, and the status light in bottom left turns green. Click Upgrade and Confirm, the software will automatically upgrade the firmware.
2.5.1 After upgrade is done, there will pop up a window showing DONE and the version information; then users need to reboot the device to let the new version take effect.